Clear the list of Recent Email Addresses on iPhone

Clear Recent Email AddressesOver time I have sent a lot of email from my iPhone, and it seems like iOS4/5 remembers every one of them fondly. As soon as I start typing an address it offers me a list of all of those email addresses that I sent one email to 3 years ago, instead of the one I want, and use regularly. In this post I am going to show you how I cleared that list on my phone.

As you would expect, you need to download a third party app and hack into the bowls of your phone to do this. And if you do decide to do this, you do so at your own risk ok!

I found a program called iBackUpBot, which lets you modify a number of aspects of your iOS4/5 device. Its not a free program, but there is enough functionality in the trial version so you can clear your recent emails list though. There is a Windows and a Mac version, so the procedure will work on both systems. Download and install.

Once you have downloaded, plug your phone in, and open iTunes. The first thing you need to do is make a back up, because its the back up files you will be working on. To force a back up, Right click on your device in the iTunes side bar and select “Back Up” from the context menu.

backup-iphone

Once the back up is complete, you can close out of iTunes, but leave your phone connected. Now open up iBackUpBot. You will need to select the back up file you just created (by device name, date and time) and click it. It will then start analyzing your back up file. Once it has finished analyzing you will see a whole bunch of entries appear on the right. Dont worry about these, as we wont be using them for this procedure. The next step is to select “Plug In” from the menu, and then select “Recent Email Addresses”.

recent-email-addresses

You will be confronted with a window that prompts you to purchase the program, you can click the cancel button to make it go away. Once it disappears, a window called “Recent Email Address Viewer” will pop up and you will see the list of recent email addresses stored in your phones memory. You can now go through the list and delete the ones you don’t want to see any more, and keep the ones you do. Just click on the offending address then hit your delete key. Once your finished, click the “Close Database” icon to save your changes and close out the window.

close database

Now it’s time to reload your modified file back to your phone. Click the “Restore Backup To iPhone” button to begin. You will have to click OK/Accept in a dialogue box, and it will take a little while, so be patient.

restore-backup

Once everything is finished, you can close iBackUpBot, disconnect your phone and try it out!

Ahhhh…….No More irrelevant email addresses……….

ADSL Line Parameters

ADSL Line ModeI learned this week that “Automatic” often means “Crap” in the world of network auto negotiations – I have a new internet connection, and when I allow my modem to auto-negotiate a connection, it gets “taken for a fool” by my ISP. I guess the ISP want’s to stop me from using all of the bandwidth I pay for, so they “encourage” customers modems to auto negotiate a slower connection. Upon digging into my ADSL 2+ modems settings, I found that under the “Line Mode” option in the ADSL Parameters menu, I could FORCE my modem to negotiate the ADSL2+ connection I am paying for, instead of the slower standard generic ADSL profile my ISP sneakily seems to want the device to auto negotiate.

If your connection seems to be slow, check your ADSL Parameter settings and make sure your line mode is equivalent to the ADSL plan you are paying for.

WD TV Live Hub Boot Failure – Auto Shut Down Power Button Problem

WD TV Live Hub Loading ScreenAs mentioned in THIS post, I bought a WD TV Live Hub unit a month ago, and I have been fairly happy with it so far. The premise/purpose of the unit is good, it is well featured in hardware, but the firmware/operating system is not as good as it could be, given the potential of the units hardware capabilities. I have found it to be slow, kinda clunky, and a bit frustrating when it comes to finding media quickly, as I have a large collection. The current version at time of writing is 2.07.17. Since purchasing the machine I have tried several versions of the firmware, and have settled/rolled back (using WD’s own rollback instructions and previous OS builds on the WD Firmware Rollback Page) to version 2.04.13, which in my opinion, and the WD Community opinion, seems to be the best offering so far.

Last week however, my 3 week old unit simply refused to boot. It didn’t work. I would press the power button on the remote and see the screen above, and then the unit would just turn itself off. I tried the using the power button on the unit, and it yielded the same result, automatic shut down after the loading screen. I was quiet enraged. My wife gathered up the units box, dug the receipt out, and was set to drive me back to the store to exchange the unit, when I proceeded to do what any grumpy male geek with a failing piece of technology would do – I took to it with a screwdriver, pried it open and voided the warranty!

I did learn a lot about this unit during this process though, and will share it with you now – and as always, I am sharing MY experience! Should you CHOOSE to try to replicate my experience with your device, and FAIL, it is completely your own fault, and I take no responsibility what so ever!

After Googling the symptoms, it appears that this is a VERY common problem with this unit, and the folks at WD refuse to acknowledge it as an issue. However, there is a VERY simple fix, but it does involve opening the unit. Inside the box is the main PCB (Printed Circuit Board), and there is a smaller PCB for the POWER button connected to the main PCB with a few wires. This seems odd for the power button to be on a different board, but it is a gift from god that it has been designed this way. It seems that something on the smaller power PCB, or perhaps the power button itself shorts/fails, hence as soon as you start the unit, the switch thinks its been pressed and it turns the unit off.

Unhappy Western Digital Customer

The cure, simply disconnect the smaller power button PCB. YES, you read correctly, just disconnect it! There is a power button on the remote you can use to switch the unit on and off anyways. The ironic part of this is that I actually found it harder to open the unit than disconnect the power button PCB. My first instinct was to crank on the thick chunky bit of plastic with the scallop shapes, but I soon learned that this was just an aesthetic, the actual lid is the thin piece above the groove in the aesthetic scallop bit.WD TV Live Hope Top Plate

To open the case, take your preferred case opening screwdriver and insert it between the thick bit and the thinner top panel at the back of the unit above the composite (yellow) video output.

Case Opening PointOnce you have made a gap you will see the fastening tabs that hold the lid on, and its just a matter of forcing the top upwards and gently pushing the fastening tabs towards the inside of the case. Below shows you the different types of tabs you will need to defeat to lift the lid.

Fastening tabsOnce you have the lid off, its a simple matter off locating the power button PCB, and the wires that join it to the main PCB. The power button PCB wires mount to the main PCB underneath, but the white terminal is easily visible, and requires little effort to disconnect. I just flicked it of with the screwdriver I used to open the case.

Power Button Wires and Main PCB

Power Button PCB Wires removedOnce the wire is disconnected, you can re-fit the top panel, plug the box in again, and watch your unit boot back into that familiar home screen!

wdtv home screen

Now, if you want to win a prize (Charlie Sheen’s Tiger Blood), look closely at the photo’s in this article and be the first to comment with the reason why everybody who reads these articles should take extra special note of my disclaimers, and why Australian Geek Guys die younger than American Geeks!